Operating30
Operating
4
Radio Operations
Be sure that FM antenna is connected. (page 19.)
Listening to the radio
1. Press
P
RADIO&INPUT until FM appears in
the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) until the frequency
indication starts to change, then release. Scanning
stops when the unit tunes in a station.
or
Press TUNING (-/+) repeatedly.
3. Adjust the volume by pressing VOL (-/+)
repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned down
the volume.
1. Press
P
RADIO&INPUT until FM appears in
the display window.
2. Select the desired frequency by using
TUNING (-/+).
3. Press
b
ENTER a preset number will ash in the
display window.
4. Press PRESET (-/+) to select the preset number
you want.
5. Press
b
ENTER.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
7. To listen a preset station,
press PRESET (-/+) or 0 to 9 numerical buttons
on the remote control.
Deleting all the saved stations
1. Press and hold CLEAR for two seconds.
“ERASEALL” will ash up on the unit display.
2. Press CLEAR to erase all saved of the radio
stations.
Deleting a saved station
1. Press PRESET (-/+) to select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again to delete the selected preset
number.
Improving poor FM reception
Press
d
PLAY, MONO/STEREO
on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
