48 Multi Air Conditioner
Function
If you set the DIP Switch when power is on, the change in setting is not applicable. The changing
setting is enabled only when Power is reset.
DIP Switch
Function
1 2 3 4 5
Normal Operation (No Function)
Forced Cooling Operation
Wiring Error Check
Saving Power Consumption (Step 1)
Saving Power Consumption (Step 2)
Mode Lock (Cooling)
Mode Lock (Heating)
Night Quiet Mode (Step 1)
Night Quiet Mode (Step 2)
Mode Lock (Cooling) + Night Quiet Mode (Step 1)
Mode Lock (Cooling) + Night Quiet Mode (Step 2)
Mode Lock (Cooling) + Saving Power Consumption (Step 1)
Mode Lock (Cooling) + Saving Power Consumption (Step 2)
Mode Lock (Heating) + Saving Power Consumption (Step 1)
Mode Lock (Heating) + Saving Power Consumption (Step 2)
DIP S/W Setting
WARNING
When you set the DIP switch, you should turn off the circuit breaker or shut the
power source of the product down.
CAUTION
• Unless the applicable DIP switch is set properly, the product may not work.
• If you want to set a specific function, request that the installer sets the DIP
switch appropriately during installation.
!
!
18/24/30/36/48/54 k 60 k
Function
To Next Page
Loading...
Need help?
General
