1. Repair Instruction
[SVC Notice] The Glide Rail do not slide out smoothly / The Glide Rail Jammed / The Glide Rail has
been rust.
Product : Dishwasher
Bulletin # : CDZ202000004-01
Release Date : 2020.02.20
Applicable for Serial Number : 911** only (911KW**08431 ~ 08660, 0A849 ~ 0A988, 0F297 ~ 0A366, 0H393 ~ 0H999,
0J000 ~ 0J001, 0K878 ~ 0K999, 0L000 ~ 0L019)
Page 1
Applicable for models
Bulletin Type : SVC Notice Parts Others Applicable only with symptoms with every repair
Symptoms
The Glide Rail does not slide out smoothly.
The Glide Rail Jammed.
The Glide Rail has rust.
Picture
Cause
The material of the Ball Bearing in the Glide changed
LDP6797** / LDP7808** / LDT7808** / SKSDW2401S
1) Disassemble the Upper Rack.
2) Replace the glide rail.
- When replacing the Glide Rail, be sure to replace both left and right parts.
※ Refer to page 4 ~ 10 for detail assemble or disassemble method.
Replace
※ If the S/No is 911KW******* and the color of the ball bearing guide in the glide rail is black, you must replace the glide rail.
Refer to page 2 for the detail identification method.
Service Bulletin
To Next Page
Loading...
