Fig 7-1
Fig 7-2
Fig 7-3
7 C-box component (Fig 7)
7-1 Remove the 2 screws fixed of the box and base pan. (Fig 7-1)
7-2 Remove the box (Fig 7-2)
7-3 Remove the interminals ground wire screw and two clip screws of power cord. (Fig 7-3)
7-4 Remove the interminals of pressure switch and the water fan motor.. (Fig 7-4)
7-5 Remove the 8 screws in c-box. (Fig 7-5)
7-6 Remove the main PCB,fan capacitor,motor capacitor,transformer. (Fig 7-6)
Fig 7-4
Fig 7
Fig 7-5 Fig 7-6
To Next Page
Loading...
