3-11
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
COMPONENT ACCESS
REMOVING THE OVEN TEMPERATURE SENSOR
1. Turn off the electrical supply and gas supply
going to the range.
2. Open the oven door and remove the racks
from the oven.
3. To remove an oven temperature sensor :
a) Remove the 1 screws.
b) Remove rear cover & motor cover (See step
3~4 on page 3-2)
c) Disconnect the wire connection.
d) Remove the oven sensor.
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
•
RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
gas range handling the sheet metal
part.
- Sharp edge may be present and you can cut
yourself.
Wire connection
1 screws
Oven temperature sensor
To Next Page
Loading...
Need help?
General
