3-9 MULTI DUCT
2. Remove 1 screws and disassemble Duct Assembly,Connector .
4.
5.
Disconnect the lead wire on the bottom position
Grip both side of multi duct, pull it out.
1.
Remove 2 screws and Guide Rail .
3. Disconnect connector.
3-10 Full Convert Drawer Display
2.
Put a flat screwdriver and a steel ruler into the corner
of full convert display.
1. Unplug refrigerator power cord from electric outlet.
3.
Pull the display using a flat screwdriver.
4. Replace the display.
-11-
Copyright © 2019 LG Electronics Inc. All rights
reserved. Only training and service purposes.