LG LS-E0960CL - Display and Self-Diagnosis Functions; Display Indicators for Heating and Cooling Models; Thermistor Error and Self-Diagnosis

-20-
11. Forced Operation
• If you lose wireless remote controller, you can operate the unit with forced operation switch.
• The standard conditions are as following.
12. AUTO RESTART
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate
procedures automatically to the previous operating conditions.
In case the air conditioner does not receive any signal from the remote control, it will turn off automatically after
7 hours.
If you want to use this operation, Open the front panel upward and move the slide switch to the Auto Restart
position.
If you do not want to use this operation, move the Slide Switch to the Remote control position.
Slide Switch
FORCED
OPERATION
AUTO
RESTART
REMOTE
CONTROL
• When you are out for a while, move the
Slide switch to the REMOTE CONTROL.
Slide Switch
Open the front
panel upward
Room Temp ≥ 24°C24°C > Room Temp ≥ 21°C Room Temp<21°C
Cooling Soft Dry Heating
High Low High
22°C23°C24°C
Operation Mode
FAN Speed
Setting Temp