29INSTALLATION
ENGLISH
Engaging the Anti-tip Device
a Anti-tip bracket
b Leveling leg
1 Slide the range against the wall, making sure
the back leg slides into and engages the anti-
tip bracket.
2 Check for proper installation by grasping the
front edge of the cooktop and carefully
attempting to tilt the range forward.
Test Run
Test the Range Before Use
Check if the range is properly installed and run a
test cycle.
1 Check the oven's operation. Turn the oven
mode knob to select the Bake mode. 350 °F
appears in the display. Press START.
2 The oven should finish preheating in 15
minutes, and the convection fan should
operate while the oven is preheating.
3 After checking the oven's operation, turn the
temperature up to 450 °F and leave the oven
on for at least an hour to help remove any oil
which might cause smoke and odors when
first using the oven.
• Smoke may come out of the range when it is first
used.
To Next Page
Loading...
