What to do if surface element control beeps and entire LED bar flashes on LG LSE4617ST Ranges?
- KKimberly StephensonJul 28, 2025
If the surface element control beeps and the entire LED bar flashes on your LG Ranges, the issue could stem from several causes. It could be due to an open or short thermistor, in which case you should follow the CF1, CF2, CF3, CF4 flow chart based on the surface element position. Another cause may be an open or short heatsink thermistor, requiring you to follow the CF5, CF6 flow chart based on the surface element position. A communication error could also be the culprit, necessitating a check using the CF7, CF8 flow chart based on the surface element position. Lastly, a non-functional box fan might be the cause, so check the connection for the box fan and replace the part if needed.