25
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
OK Button
INPUT Button
• The unit that receives the signal from the remote control.
IR Receiver
• OK button is usually used in choosing the MENU.
When there is no MENU on the screen pushing the OK button will
give the information about the current input source.
TV Television
AV1 SCART
AV2 CVBS, S-Video
RGB D-Sub analog signal
Input
TV
AV1
AV2
RGB
OK
Each time you press the Input button it will change to TV AV1 AV2 RGB
If nothing is inputted for several seconds the screen will automatically move to the selected menu.