6
Name and Function of the Parts
Name of the Remote Control Buttons (Atype)
PR
OK
POWERMUTE
TV
INPUT
LIST MENUQ.VIEW
PR
VOL
VOL
I/II
MUTE
POWER
TV :
TV button
INPUT
I/II : Bilingual choice and sound mode selection
Press this button
[TV]
to switch from Stereo to Mono sound in case of stereo transmission,
or from Nicam Stereo to Nicam Mono, in case of digital transmission.
to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in
case of Nicam Dual transmission.
to choose between Dual I, Dual II or Dual I+II in case of bilingual
transmission :
Dual I sends the primary broadcast language to the loudspeakers ;
Dual II sends the secondary broadcast language to the loudspeakers ;
Dual I+II sends a separate language to each loudspeakers.
[AV]
In AV mode, you can select output sound for the left and
right loudspeakers. Repeatedly press the I/II button to
select the sound output.
L+R : Audio signal from audio L input is sent to left
loud-speaker and audio signal from audio R input is
sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right
loud-speakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
NOTE : In case of weak stereo
sound signals, with stereo or
Nicam stereo transmission,
select mono reception.
Each time you press the Input
button it will change to
TV AV1 AV2
RGB
If nothing is inputted for several
seconds the screen will
automatically move to the selected
menu.
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent environmental pollution.
Inserting batteries into remote control.
Input
TV
AV1
AV2
RGB
OK
To Next Page
Loading...
Need help?
General
Weight and Dimensions
