LG M1921A User Manual

4
Before Connecting to the PC
Connecting the stand
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off.
1. Place the monitor with its front facing downward on a soft cloth.
2. Connect the Stand Base to the Stand Body and press latches at the button toward each end.
3. Connect the Stand, assembled in step 2, to the Monitor Panel until you hear a "Click".
4. Once assembled take the monitor up carefully and face the front side
Important
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Stand
Slot
Stand Body
Stand Base
2.
3.

LG M1921A Specifications

General

HD type	-
Response time	8 ms
Display diagonal	19 \
Display resolution	1280 x 1024 pixels
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 83 kHz
Viewing angle, vertical	160 °
Contrast ratio (typical)	700:1
Display number of colors	16.78 million colors
Display brightness (typical)	300 cd/m²
Power consumption (off)	2 W
Power consumption (typical)	55 W
Power consumption (PowerSave)	4 W
Plug and Play	Yes
Video out	S-Video
RMS rated power	3 W
Product color	Black

Weight and Dimensions

Depth (without stand)	243 mm
Width (without stand)	445 mm
Height (without stand)	457 mm
Weight (without stand)	5500 g