EasyManuals Logo

LG M2762D User Manual

LG M2762D
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
110033
No picture &No sound
No color, poor colour,
or poor picture
Poor reception on
some channels
Lines or streaks
in pictures
Horizontal/vertical bars
or picture shaking
Picture appears slowly
after switching on
A
Check whether the product is turned on.
A
Try another channel. The problem may be with the broadcast.
A
Is the power cord inserted into wall power outlet?
A
Check your antenna direction and/or location.
A
Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
A
This is normal, the image is muted during the product startup process. Please
contact your service centre, if the picture has not appeared after five minutes.
A
Adjust Colour in menu option.
A
Keep a sufficient distance between the product and the VCR.
A
Try another channel. The problem may be with the broadcast.
A
Are the video cables installed properly?
A
Activate any function to restore the brightness of the picture.
A
Check for local interference such as an electrical appliance or power tool.
A
Station or cable product experiencing problems, tune to another station.
A
Station signal is weak, reorient antenna to receive weaker station.
A
Check for sources of possible interference.
A
Check antenna (Change the direction of the antenna).
TROUBLESHOOTING
TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy..
The remote control
doesn’t work
Power is suddenly
turned off
A
Check to see if there is any object between the product and the remote control caus-
ing obstruction. Ensure you are pointing the remote control directly at the set.
A
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A
Ensure that the correct remote operating mode is set: TV, VCR, etc.
A
Install new batteries.
A
Is the sleep timer set?
A
Check the power control settings. Power interrupted.
A
No broadcast on station tuned with
AAuuttoo sslleeeepp
activated.
TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk..
APPENDIX

Table of Contents

Other manuals for LG M2762D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG M2762D and is the answer not in the manual?

LG M2762D Specifications

General IconGeneral
Pixel pitch0.3114 x 0.3114 mm
Aspect ratio16:9
Display diagonal27 \
Separate H/V syncYes
Vertical scan range56 - 75 Hz
Horizontal scan range30 - 83 kHz
Viewable size diagonal584.2 mm
Viewing angle, vertical160 °
Contrast ratio (dynamic)50000:1
Contrast ratio (typical)1000:1
Viewing angle, horizontal170 °
Display brightness (typical)300 cd/m²
Bandwidth0.135 GHz
Display viewable area (HxV)597.7 x 336.2 mm
Display resolution at frequency1920 x 1080 @ 60 Hz
USB hub version2.0
RMS rated power6 W
CertificationTÜV-Typ, CE, UL, CSA, SEMKO, FCC-B
Product colorBlack
Market positioning-
Compliance industry standardsDDC 2B
LED indicatorsStand-by
Tilt angle range-5 - 15 °
Panel mounting interface100 x 100 mm
Power consumption (standby)1 W
Power consumption (typical)120 W
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)210 mm
Width (without stand)654.1 mm
Height (without stand)494.6 mm
Weight (without stand)8920 g

Related product manuals