7744
NICAM Reception (In Analogue Mode Only)
When
NNIICCAAMM mmoonnoo
is received, you can select
NNIICCAAMM MMOONNOO
or
FFMM MMOONNOO
.
When
NNIICCAAMM sstteerreeoo
is received, you can select
NNIICCAAMM SSTTEERREEOO
or
FFMM MMOONNOO
.
If the stereo signal is weak, switch to
FFMM MMOONNOO
.
When
NNIICCAAMM dduuaall
is received, you can select
NNIICCAAMM DDUUAALL II
,
NNIICCAAMM DDUUAALL IIII
or
NNIICCAAMM DDUUAALL II++IIII
or
FF MM MMOONNOO
.
If the set is equipped with the receiver for NICAM reception, high quality NICAM (Near Instantaneous Companded
Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button
repeatedly.
Speaker Sound Output Selection
“In AV, Component, RGB, HDMI and DVI mode” you can select output sound for the left and right loudspeakers.
Repeatedly press the
II//IIII
button to select the sound output.
LL++RR::
Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent
to the right loud speaker.
LL++LL::
Audio signal from audio L input is sent to left and right loud speakers.
RR++RR::
Audio signal from audio R input is sent to left and right loud speakers.
1
2
3
SOUND CONTROL
To Next Page
Loading...
Need help?
General
Weight and Dimensions
