Chapter 1. INTRODUCTION
1- 1
Chapter 1. INTRODUCTION
This manual describes the specifications, handling instructions, and programming information for the
G3F– HSCA, the G4F–HSCA and the G6F-HSCA.
It is the high speed counting module used with CPU of the GLOFA PLC GM1/2/3/4/6 series and the
MASTER-K200S/300S/1000S series.
The G3F-HSCA is used for GM1/2/3 series and K1000S series, and the G4F-HSCA for GM4 series
and K300S series, the G6F-HSCA for GM6 series and K200S series.
The G3F-HSCA, the G4F-HSCA and the G6F-HSCA consist of 24bit counting part which performs in-
crement or decrement count, an external input part, a comparison part which compares the set value
specified by the user with the current counting value, and an output part which outputs the comparison
results.
To Next Page
Loading...
Need help?
General
