Chapter 2. SPECIFICATIONS
2 - 1
Chapter 2. SPECIFICATIONS
2.1 General Specifications
Table 2.1 shows general specifications of the GLOFA GM series and MASTER-K series.
No Item Specifications Standards
1
Operating ambient
0 ~ 55℃(32 ~ 131℉)
2
Storage ambient
-25 ~ 75℃(-13~167℉)
3
Operating ambient
5 ~ 95%RH, non-condensing
4
Storage ambient
humidity
5 ~ 95%RH, non-condensing
≤
∠
≤
≤
≤
∠
5 Vibration
≤
≤
㎨
10 times in each
direction for
X, Y, Z
IEC 61131-2
6 Shocks
*Maximum shock acceleration: 15g
*Duration time :11 ms
*Pulse wave: half sine wave pulse( 3 times in each of X, Y and Z directions )
IEC 61131-2
impulse noise
±1,500 V
Electrostatic discharge Voltage :4kV(contact discharge)
IEC 61131-2
IEC 1000-4-2
Radiated electromagnetic field 27 ~ 500 MHz, 10 V/m
IEC 61131-2
Severity
Level
All power
modules
Digital
I/Os
( Ue
≥
24 V)
Digital I/Os
(Ue < 24 V)
Analog I/Os
communication
I/Os
7 Noise immunity
Fast transient burst noise
IEC 61131-2
IEC 1000-4-4
8
Operating
Free from corrosive gases and excessive dust
9 Altitude for use Up to 2,000m(6,562ft)
10 Pollution degree 2 or lower
11 Cooling method Self-cooling
[Table 2.1 ] General Specifications
Remark
1) IEC(International Electrotechnical Commission)
: The international civilian organization which produces standards for electrical and electronics industry.
2) Pollution degree
: It indicates a standard of operating ambient pollution level.
The pollution degree 2 means the condition in which normally, only non-conductive pollution occurs.
Occasionally, however, a temporary conductivity caused by condensation shall be expected.