LG MCD202 - Tape Playback; Tape Recording

12
Tape Playback
Use only normal tapes.
Basic Playback
1. Press TAPE (or FUNCTION) to select
TAPE function.
(“NO TAPE” appears in the display
window.)
2. Load a tape.
3. Press PLAY(
BB
).
To Stop Play
Press
xx
STOP during playback.
To Play Rewind or Fast Forward
After pressing .bb/BB> on the front
panel or bb/BB on the remote control during
playback, press PLAY(
BB
) at the point you want.
AUTO STOP DECK (TAPE 1/2)
After auto stop deck plays only the front side, the
unit stops automatically.
Dubbing
This function shows how to record from tape to
tape.
1. Press TAPE (or FUNCTION) to select tape
function.
• Cassette TAPE 1- Insert a playback tape to
dub.
• Cassette TAPE 2- Insert a blank tape.
2. Press DUBB as shown below.
To stop dubbing, press
xx
STOP.
Tape Recording
Wind the tape to the point recording starts.
Use only normal tapes.
Basic Setting
1. Select a function you want to record except
tape function.
2. Open the cassette TAPE 2 and insert a
blank cassette into the cassette compart-
ment.
General Recording
1. Press REC/
[[]]
on the front panel or z/
[]
on
the remote control.
- “REC” flashes and holds the cassette in
pause mode.
2. Press REC/
[[]]
on the front panel or z/
[]
on
the remote control again, then press PLAY
(
BB
) to start playing the source you want to
record. The recording begins.
To pause recording
Press z/
[]
during recording.
- “REC” flashes in the display window.
To stop recording
Press
xx
STOP.
CD to Tape Synchronized Recording
The CD synchro recording function dubs a com-
plete CD and programmed titles automatically
into a cassette.
1. Press CD and load a disc you want to
record.
2. Press CD SYNC. in stop mode.
“REC” flashes and “CD SYNC” indicator
lights.
3. The synchronized recording is started
automatically after about 7 seconds.
Notes:
• If you wish to record from the desired track,
select the desired track with CD SKIP/
SEARCH (.bb/BB>) before
commencing CD synchro recording.
• You cannot change any mode during
recording.