Recording to TAPE
You can record a various sound source to TAPE.
1. Open the tape deck and then insert a blank
tape.
2. Select a function in which you want to
record by using CD, TUNER or USB on the
unit or FUNCTION on the remote control.
3. Playback a sound source rst by using
< PRESET - / PRESET + > on the unit or
B
/
X
on the remote control.
4. Press
Rec. PAUSE on the unit or REC on the
remote control.
- The display changed in the following
order, “USB REC” <-> “TAPE REC”
5. Press the
Rec. PAUSE on the unit or REC on
the remote control button once more when
“TAPE REC” is displayed.
- Recording starts.
6. To stop recording, press
STOP on the unit
or
x
on the remote control.
Synchronized Recording from
CD to Tape
1. Open the tape deck and then insert a blank
tape.
2. Close the door and insert a CD.
- Audio CD only
3. To select CD function, press
CD on the unit
or FUNCTION on the remote control.
4. Press
CD Sync. on a stop status to move to
CD synchronizing mode.
- Recording automatically starts 7 seconds
later after “CD SYNC” blinks.
5. To stop, press
STOP on the unit or
x
on the
remote control.
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a function in which you want to
record by using CD, TUNER or TAPE on the
unit or FUNCTION on the remote control.
One track recording - You can record to USB
after playing the le you want.
All tracks recording - You can recording to
USB after stop.
Program list recording - After moving to the
programmed list and you can record it to
USB.
3 Press
Rec. PAUSE on the unit or REC on the
remote control.
- The display changed in the following
order, “USB REC” <-> “TAPE REC”
4 Press the
Rec. PAUSE on the unit or REC on
the remote control button once more when
“USB REC” is displayed.
> Recording starts.
5. To stop recording, press
STOP on the unit
or
x
on the remote control.
To Next Page
Loading...
