29
Installation Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
ACCESSORIES INSTALLATION
Door/Window Sensor ZVRCZDWC1
Follow this procedure to install the optional
door/window sensor.
Consider the following location constraints before
installing a door/window sensor:
• Do not install a on metal surface.
• Do not install in areas with a direct heat
source.
• Do not install near any air discharge grill.
• Do not install in areas exposed to direct
sunlight.
• Ensure mounting surface is at and clean.
• Install in a dry location away from water, moisture, or rain.
Sensor Placement
Figure 35 shows suggested placement guidelines to optimize sensor operation.
Ensure contact switch and magnet face each other as shown in Figure 35.
Figure 34: Door/Window Sensor
Figure 35: Door/Window Sensor Placement
To Next Page
Loading...
Need help?
General
