Some models may support the Wi-Fi Connection function only.
The wireless network connection is not working.
1. Change General System Additional Settings Quick Start+ to Off.
2. Turn off the TV and turn it back on, then connect to the wireless network.
If it cannot connect to the router, try connecting it to the mobile hotspot on your
smartphone. If it can be connected to the mobile hotspot, this indicates that it is a router
problem. In this case, please check the router.
If you use the network with a TV connected to a mobile hotspot, you may be charged
according to the contract with your carrier.
When X appears next to TV
Check the TV or the AP (Router).
Check the connection status of the TV, AP (Router) and cable modem.
Power off and power on in the following order;
1. Turn your cable modem off and back on, and wait for the device to reset.
2. Turn the wired/wireless router off and back on, and wait for the device to reset.
3. Turn the TV off and on.
If you want to establish a wired LAN connection, check whether an IP address can be
obtained from your router properly. If you are setting up your network manually, check
whether all settings are correct.
If you want to establish a wireless connection, check the following points as well.
① Set your router’s SSID (network name) or wireless channel.
② Set your router’s security key.
If you can't complete this setting, refer to the router's user manual and the instructions
provided by your Internet provider. If you are still unable to establish your configuration,
consult your router’s manufacturer or your Internet service provider.
If you are using a static IP, enter the IP directly.
When X appears next to Gateway
Check the AP (Router) or consult your Internet service provider.
Unplug the router/cable modem from the wall outlet, wait 10 seconds and reconnect it.
Initialize (Reset) the AP (Router) or cable modem.
Check the AP (Router) manufacturer’s website to make sure your router has the latest
To Next Page
Loading...
Need help?
General
