Adobe RGB
Sets the Colour Gamut to Adobe RGB standards.
Fine Tune
This is used when experts control it by using a test pattern. You can control it by
selecting areas of six colours (Red/Green/Blue/Cyan/Magenta/Yellow).
For normal images, adjustments may not result in noticeable colour changes.
Colour Adjustment
Adjusts the Colour and saturation of the picture to make the image more Colourful
and lively.
Select Colour
From Red/Green/Blue/Cyan/Magenta/Yellow, select a tone to adjust.
Adjust Saturation / Adjust Tint / Adjust Luminance
Adjust the chroma/tint/luminance of the tone in the range of -30 to +30.
White Balance
The function to adjust each colour to be reproduced more accurately based on white
allows you to adjust the overall colour tone of the screen to your preference.
Colour Temperature
You can set the colour to make the display look cooler or warmer.
Method
This method is used for fine-tuning the color temperature setting. You can control
the colour temperature at two points of the bright part and dark part of the video if
you select 2 Points, at each point of 10 levels if you select 10 Points Signal
Level(%), and at each point of 22 levels of the video if you select 22 Points Signal
Level(%).
Point
Select screen brightness for color temperature adjustment.
To Next Page
Loading...
Need help?
General
