Sub function
Owner’s & Installation Manual 21
ENGLISH
Electric heater (Optional)
It can only be set during heating operation.
Press the FUNCTION SETTING button 3 times.
Electric heater symbol will blink.
1
Press the SET/CLEAR button to reserve or cancel the Electric heater function.
2
• The indoor unit displays during the heating mode, the Auxiliary heater is automatically turned on, but it is not
displayed on the wireless remote controller separately.
• It operates in Floor heating mode in Console products.
Press the LCD LUMINOSITY button.
It is comfortable when you feel that the display of the unit too bright .
Press the °C/°F SWITCH button to change from Celsius to Fahrenheit or from Fahrenheit to Celsius.
Whenever press TEMPERATURE SETTING button in Fahrenheit mode, the temperature
will increase/drop 2°F.
Celsius/Fahrenheit Switching
LCD Luminosity Control (Optional)
To Next Page
Loading...
Need help?
General
