LG PRIP0 - Assembly Diagram; High Static Duct;FAU Assembly

Assembly Diagram
Installation Manual 9
ENGLISH
3
L
Fig. A
Control box cover
screw
Insulation
5. Assembly Diagram
n High Static Duct/FAU
Note: While connecting the PRIP0, attach insulation at the rear of the control box cover
where it receives screws as shown in Fig. A.
Check the distance between PRIP0 and a control box when
connecting anchor bolts.
Step1. Open control box cover. Step2. Assemble PRIP0 with control box cover.
Step3. Open the cover of PRIP0 and connect wires. Step4. Assemble control box cover.
Assembly Diagram - PRIP0
Chassis L
BH 1 090
BG 1 350
BR 1 400
B8 1 720
(Unit : mm)
CAUTION
!