EasyManuals Logo

LG RCT689H Owner's Manual

LG RCT689H
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
System Setting26
System Setting
3
VCR Play Aspect
You can choose:
[AUTO]
Automatically plays back Wide-Screen
programmes as Wide-Screen and Normal
programmes as normal.
[4:3]
Only for playing back Normal format recordings
(4:3).
[16:9]
Only for playing back Wide-Screen format
recordings (16:9).
VCR Play System
Your video recorder uses triple colour standards,
Auto, PAL and MESECAM. During play your
video recorder should select the colour system
automatically, however if you experience problems
you may need to do it manually.
Video output format
Select the Video output format option according to
the connection type of this unit.
[YPbPr]
When your TV is connected with the
COMPONENT OUTPUT jack on this unit.
[RGB]
When your TV is connected with the
SCART(RGB signal) jack on this unit.
This option can be changed only when the
resolution is set to 576i.
,
Note
Antenna Feed 5V
If you are using indoor antenna with a signal
amplier rated at DC 5V, 100mA, the recorder can
supply power through ANTENNA IN jack.
1. Display [Setup] menu.
2. Use
a/d/s/w
to select the [Antenna Feed
5V], and press ENTER (
b
).
3. Use
w
/
s
to select [ON] and press ENTER (
b
) to
supply antenna power.
The [Antenna Feed 5V] option must be set to
[OFF] when your indoor antenna is supplied
the power from the mains. If you set the
[Antenna Feed 5V] option to [ON] for the
indoor antenna which is supplied power from
the mains, it may cause serious defect to this
unit.
,
Note
Initialization
You can reset the recorder to its original factory
settings.
[Factory Set] If you need to, you can reset the
recorder to all its factory settings. Some options
cannot be reset. (DVD Rating, Password, and Area
Code) Select [Factory Set] icon then press ENTER
(
b
) and auto setup menu will appear, see page 21.
1. Select [Initialization] option then press
d
.
2. Press ENTER (
b
) and then conrm message will
appear.
3. Use
a/d
to select [Yes] or [No] then press
ENTER (
b
).
Auto Power Off
If you set this option to [On], when you leave the
unit in stop mode for about 25 minutes, the unit
automatically turns itself o.

Table of Contents

Other manuals for LG RCT689H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG RCT689H and is the answer not in the manual?

LG RCT689H Specifications

General IconGeneral
Progressive scan outputYes
Analog signal format systemPAL, SECAM
Playback formatsDivX, MPEG4 AVC (H.264)
Dimensions (WxDxH)430 x 260 x 78.5 mm
Number of TV tuners1
Audio formats supportedMP3, WMA
Image formats supportedJPG
Audio decodersDolby Digital
Device typeDVD recorder
Product colorBlack
Disc types supportedCD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.

Related product manuals