System Setting22
System Setting
3
LEVEL menu
You can adjust the level of each speaker to suit your
preference.
1. Press RECEIVER, and then press SETUP.
"1 TESTTONE" appears on the display window.
2. Press
W/S
repeatedly until “2 LEVEL” appears,
then press ENTER (
b
).
3. Press
A/D
repeatedly until the desired
speaker appears.
Display Description
FL Front left speaker (- 6 ~ 0)
C Center speaker (- 6 ~ + 6)
FR Front right speaker (- 6 ~ 0)
SR Surround right speaker (- 6 ~ + 6)
SL Surround left speaker (- 6 ~ + 6)
SW Subwoofer (- 40 ~ + 6)
4. Press
W/S
to adjust the level of each speaker
and then press ENTER (
b
).
5. Press RETURN to move to the previous menu.
Press SETUP to exit the SETUP menu.
DISTANCE menu
You can set the distance of the speakers connected
to this unit.
1. Press RECEIVER, and then press SETUP.
"1 TESTTONE" appears on the display window.
2. Press
W/S
repeatedly until “
3 DISTANCE"
appears, then press ENTER (
b
).
3. Press
A/D
repeatedly until the desired speaker
appears.
Display Description
FL Front left speaker (0.0 M ~ 6.0 M)
C Center speaker (0.0 M ~ 6.0 M)
FR Front right speaker (0.0 M ~ 6.0 M)
SR Surround right speaker (0.0 M ~ 6.0 M)
SL Surround left speaker
(0.0 M ~ 6.0 M)
SW Subwoofer (0.0 M ~ 6.0 M)
4. Press
W/S
to set the distance of the speakers
and then press ENTER (
b
).
5. Press RETURN to move to the previous menu.
Press SETUP to exit the SETUP menu.
A/V SYNC menu (Adjusting
the audio delay)
You can delay the sound output using this function
when the image is slower than the sound.
1. Press RECEIVER, and then press SETUP.
"1 TESTTONE" appears on the display window.
2. Press
W/S
repeatedly until “4 A/V SYNC”
appears, then press ENTER (
b
).
3. Press
W/S
to adjust the delay between sound
and image and then press ENTER (
b
).
You can adjust from 0 MS to 300 MS in 10 MS
steps.
4. Press RETURN to move to the previous menu.
Press SETUP to exit the SETUP menu.
You may not be able to adjust the delay
between sound and image perfectly using this
function.
,
Note
To Next Page
Loading...
