LG SR906SB User Manual

Operating 35
Operating
4
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing You can
1
(POWER) Turn the TV on or o .
0-9 numerical
buttons:
Selects numbered options in
a menu or inputs letters in the
keypad menu.
TV INPUT Select the TV’s source.
MUTE (
)
Turns o the sound temporarily.
Press the button again to
restore the sound.
PR/CH
W/S
Scan up or down through
memorized channels.
VOL +/– Adjust the volume of the TV.
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
,
Note
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
1. Turn the TV on.
2. Press TV on the remote control to enter the TV
mode.
3. Press and hold TV for about 3 seconds until the
TV button can be seen illuminated.
4. Press the manufacturer code for your TV with
the numerical buttons (three digit code).
See the manufacturer code list on the pages 38-
43.
5. Press the ENTER (
b
) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.

LG SR906SB Specifications

General

Brand	LG
Model	SR906SB
Category	Speaker System
Language	English