Operating32
Operating
4
Using the Sleep Timer
You can set the unit to turn o automatically at a
speci ed time.
Press SLEEP repeatedly.
The minutes display (the remaining time) changes
cyclically on the display window as follows.
DIMMER
t
SLEEP 180
t
150
t
120
t
90
t
80
t
70
t
60
t
50
t
40
t
30
t
20
t
10
t
OFF (No display)
To check the remaining time, press SLEEP. The
remaining time appears on the display window.
To cancel the sleep function, press SLEEP repeatedly
until “SLEEP 10” appears, and then press SLEEP once
again while “SLEEP 10” is displayed.
When you press SLEEP, the *DIMMER function
is set.
* DIMMER function: The brightness of the
display window is darken by half.
When you press SLEEP again, the Sleep Timer
function is set.
,
Note
Displaying the fi le
information
You can display various information on the display
window by pressing INFO/DISPLAY (
m
).
Input source Description
BD, DVD, STB, TV,
GAME, or CD
Displays the audio format
and audio channel. (“PCM
2/0.0”, “DD 3/2.1”, “DTS3/2.1”,
or “AAC3/2.1”)
VCR or PORTABLE "ANALOG" is displayed.
USB Displays the le information
during MP3/WMA playback.
IPOD Displays the title, artist and
album.
If there is no input source, the “-- 0/0.0”
appears on the display window.
,
Note