- 19 -
2.2 Sleep Timer Operation
• When the sleep time is reached after <1,2,3,4,5,6,7,0(cancel) hr> is input by the control panel while in appliance oper-
ation, the operation of the appliance stops.
• While the appliance is on pause, the sleep timer mode cannot be input.
2.3 Timer (On / Off)
2.3.1 On-Timer Operation
• When the set time is reached after the time is input by the control panel, the appliance starts to operate.
• The timer LED is on when the on-timer is input. It is off when the time set by the timer is reached.
• If the appliance is operating at the time set by the timer, the operation continues.
2.3.2 Off-Timer Operation
• When the set time is reached after the time is input by the control panel, the appliance stops operating.
• The timer LED is on when the off-timer is input. It is off when the time set by the timer is reached.
• If the appliance is on pause at the time set by the timer, the pause continues.
2.4 Weekly Program
• If necessary, an operator can make an On / Off reservation of the product for a period of one week.
- On / Off schedule of operation for a period of one week.
• No need to turn the unit On / Off manually during working days.
On / Off time is scheduled in micom of the wired remote control.
Temp.
2.5 Sanitary Tank Heating Scheduler & Sanitary Tank Heater Scheduler
• If necessary, enable or disable of sanitary tank heating or sanitary tank heater can be programmed according to user’s
specific time.
• Schedulers are operating everyday.
2.6 Silent mode operation
• If necessary, enable or disable of silent mode can be programmed according to user’s specific time.
2.7 Screed drying
• If necessary, enable or disable of screed drying can be programmed according to user’s setting.
• While the screed drying mode is operating, “Dry” is displayed.
To Next Page
Loading...
