Temperature Setting
12 Air-to-Water Heat Pump
You can easily control to the desired temperature.
• In the main screen, press [<, > (left/right)] button to select the desired temperature category, and
press [∧ , ∨ (up/down)] button to set the desired temperature.
- In the cooling, heating, and AI/auto mode, the desired temperature control is possible.
Temperature Setting
Mode Description
Room
temperature
Room temperature setting is available when remote room air sensor (sold
separately) is installed
Leaving water
temperature
If the desired temperature is lower than the water temperature, the heating
is not performed.
Set the desired temperature higher than the water temperature.
DHW tank
temperature
DHW tank temperature setting is available when DHW tank is installed.
To Next Page
Loading...
Need help?
General