ENGLISH
37
No Signal Image
(Depending on model)
• You can set to ‘Off’, ‘Default Image’ or ‘Downloaded’.
• It is a mode to decide whether to use no signal image when there is no signal.
• When set to ‘Off’, do not use no signal image.
• When set to ‘Default Image’, use no signal image using the default image.
• When set to ‘Downloaded’, use no signal image using the downloaded image. (Depending on model)
No Signal text
(Depending on model)
• Set to ‘On’ or ‘Off ’.
• It is a mode to decide whether to use no signal text when there is no signal.
DPM
(Depending on model)
(On Europe models, it is indicated by DPM (Standby Mode))
• You can configure the DPM (Display Power Management) function.
• If this option is not set to Off, the TV set enters the DPM mode when there is no input signal.
• If you set this option to Off, the DPM function is disabled.
PM Mode
(Depending on model)
• Power Off (Default)
-
Set the normal DC Off mode.
• Sustain Aspect Ratio
(Depending on model)
-
Set the power mode of the HDMI Switching IC, which detects HDMI external input signals in the TV Standby state after DPM Power Off
turns off the TV.
• Network Ready
-
Set the Active Standby mode when TV turns off.
-
TV seems to be turned off but it keeps to be on.
-
TV goes through the normal DC On process when it turns on.
Healthcare Headphone Mode
(Depending on model)
• Healthcare Headphone On
-
Mute is always applied to TV Speaker.
-
Sound Out menu is displayed as Internal TV Speaker + Wired Headphone, and all Sound Out submenus are gray out (Disable).
-
Internal TV Speaker / Headphone Simultaneous output, Volume key is adjust TV volume (Mute off).
-
Select TV Speaker User Interface. Volume key adjusts the internal TV Speaker volume.
-
Select Headphone User Interface. Volume key adjusts the headphone volume.
• Healthcare Headphone Off
-
Sound Out Normal Scenario on Commercial Hotel TV.
-
Sound Out has Menu in default mode (Internal TV Speaker + Audo Out (Optical)).
To Next Page
Loading...
Need help?
General
