ENGLISH
75
Command Reference List
(Depending on model)
Command1 Command2
Data
(Hexadecimal)
1 Power k a 00 to 01
2 Aspect Ratio
k c (See p. 76)
3 Screen Mute k d (See p. 77)
4 Volume Mute k e 00 to 01
5 Volume
Control
k f 00 to 64
6 Contrast k g 00 to 64
7 Brightness k h 00 to 64
8 Colour k i 00 to 64
9 Tint k j 00 to 64
10
Sharpness k k 00 to 32
11
OSD Select k l 00 to 01
12
Remote
Control Lock
Mode
k m 00 to 01
13
Balance k t 00 to 64
14
Colour
Temperature
x u 00 to 64
15
Energy Saving j q (See p. 79)
16
Auto
Configuration
j u 01
17
Equalizer j v (See p. 79)
18
Tune
Command
m a (See p. 80)
19
Programme
Skip / Add
m b 00 to 01
20
Key m c (See p. 80)
21
Control
Backlight
m g 00 to 64
22
Input select x b (See p. 81)
23
Programme
block/unblock
m d (See p. 81)
Command1 Command2
Data
(Hexadecimal)
24
Fail Over Mode m i (See p. 82)
25
Fail Over Input
Select
m j (See p. 82)
26
Internal
storage media
contents play
s n, a8 (See p. 83)
• During playing media, all commands except Power(ka) and Key(mc)
are not executed and treated as NG. With RS-232C cable, TV can
communicate “ka command” in power-on or power-o status. but
with USB-to-Serial converter cable, the command works only if TV
is on.
To Next Page
Loading...
