LG UN64 Series - Channel & Key Control Commands; Tune Command; Programme Skip;Add Command; Key Command

ENGLISH
80
18 Tune Command (Command: m a)
► Select channel to following physical number.
Transmission
(m)(a)( )(Set ID)( )(Data 00)( )(Data 01)( )(Data 02)(Cr)
Data 00 : High channel data
Data 01 : Low channel data
ex. No. 47 00 2F (2FH)
No. 394 01 8A (18AH),
DTV No. 0 Don’t care
Data 02 : (Antenna)
0 x 00 : Analogue Main
0 x 10 : DTV Main
0 x 20 : Radio
(Cable)
0 x 80 : Analogue Main
0 x 90 : DTV Main
0 x A0 : Radio
(Satellite)
0 x 40 : DTV Main
0 x 50 : Radio Main
Channel data range
Min : 00 Max : 270F (0 to 9999)
Ack
(a)( )(Set ID)( )(OK/NG)(Data)(x)
19 Programme Skip / Add (Command: m b)
► To set skip status for the current Programme.
Transmission
(m)(b)( )(Set ID)( )(Data)(Cr)
Data 00 : Skip
Data 01 : Add
Ack
(b)( )(Set ID)( )(OK/NG)(Data)(x)
20 Key (Command: m c)
► To send IR remote key code.
Transmission
(m)(c)( )(Set ID)( )(Data)(Cr)
Data “IR Codes”
Ack
(c)( )(Set ID)( )(OK/NG)(Data)(x)
21 Control Backlight (Command: m g)
► To control the backlight.
Transmission
(m)(g)( )(Set ID)( )(Data)(Cr)
Data Min : 00 to Max : 64
Ack
(g)( )(Set ID)( )(OK/NG)(Data)(x)