BUTTON FUNCTIONS – REMOTE CONTROL
• The Roboking’s power supply cannot be turned on with the remote control.
• To turn on the power supply, use START/STOP button on the top of Roboking.
• In order to do spot cleaning, timer cleaning, zigzag cleaning, and spatial expansion cleaning, you
must first stop the operation of the Roboking.
• If the main frame is turned off, the remote control will not be activated.
• The preset feature may be set only when the Roboking returns to the charging stand.
• If the main switch on the underside of the Roboking is in the off position, the Status display will
flash and sound when the unit is manually placed onto the home station, to indicate that the
main switch is off.
Tip
Start Charging
Directional button
Stop
Spot
Timer
Zigzag cleaning and then
spatial expansion
The Roboking will start cleaning The Roboking will move to the
home station for charging.
The Roboking will move as desired
by the user: to front, rear, left, and
right sides for cleaning.
If the Roboking is in operation it will
be stopped. If it has been set for
timer cleaning, the reservation will be
canceled.
Cleaning will concentrate within a
space of about 1 m (3.28 ft).
The timer can be set from 1-12
hours in the future.
The Roboking will clean while ma-
neuvering in a zigzag pattern and
then expand the cleaning area.
To Next Page
Loading...
Need help?
General
