13
1. Position the home station against a wall, to prevent sliding dur-
ing docking, on hard level flooring.
Remove objects within 1m. to the right and left side and within
2m. to the front.
2. Plug the power cord into an outlet.
Wrap the power cord around the fixed hanger on the back side
of the home station or along the wall surface so that the travel
path of the Roboking will not be obstructed.
3. Fix the home station against the wall so that it does not move.
How to Install the Home Station
• Always keep the home station plugged in. If the home station is not plugged in, the Roboking
will not return to the station to charge automatically.
• Do not operate the Roboking if it has a damaged cord or plug, if it is not working properly, or
if it has been damaged or dropped. To avoid hazard, the cord must be replaced by LG Elec-
tronics, Inc. or a qualified service person.
HOW TO INSTALL THE HOME STATION
Tip
Fixing groove of power cord
To Next Page
Loading...
Need help?
General
