17
Check 1. If the battery is not charging even when the Roboking is at-
tached to the home station, check the following items.
- Turn the power switch on the bottom of the Roboking off
once and then on again.
- Unplug and plug in the power plug on the home station.
- Wipe the terminal on the home station with a dry cloth.
Check 2. If the battery is still not charging after the previous check, try
the following.
- Attach the Roboking to the home station.
-
Press the reset button at the rear of the home station for
three seconds.
If the Battery is Not Charging
The remaining battery charge can be confirmed from the charge indication light, which will indicate charge
as follows:
• During charging, the charge remaining indication light will flicker.
• When charging is completed at the home station, only the battery icon will illuminate to save power.
• The battery icon will flicker when battery charging is required.
Remaining Battery Charge Indicator
Fully charging
(under charging)
High middle Low
Charging is required
Flickering
※ If the “TING” sound is repeated when the main unit is at-
tached on the home station, check the main power switch.
HOW TO CHARGE THE BATTERY
To Next Page
Loading...
Need help?
General
