58
Cablinet Back Disassembly
2
Remove 6 screws between back cover
and side cabinet.
1
3
Remove 4 screws conneted back cover
with base cabinet.
4
Remove 2 screws, between back cover
and tub outer.
5
Remove 2 screws for fixing drain hose
holder.
6
Remove 4 screws from Inlet valve and
AG.
7
Remove 2 earth screws from back cover.
8
Disassembly 3 holder hooks for fixing
harness.
9
Disassembly a red connector assembled
noise filter.
10
Pull out drain hose from the back cover.
11
Disassembly back cover.
Disassembly top plate assembly.
Needed tool : (+) Electric driver
To Next Page
Loading...
