59
Rear Gasket
Disassembly top plate assembly.
Needed tools :12,13 mm wrench, (
) Clamp Jig, Cable Tie, (+) Electric driver
Disassembly back cover.
Remove rear gasket clamp large and
small by using gasket clamp jig.
Unscrew a rear suspension nut.
Unscrew a bolt , between bearing housing
and rear suspension.
Disassembly rear suspension.
Remove 8 screws, on the both weight
bracket.
Disassembly rear gasket.
1
2
3
4
5
6
7
8
To Next Page
Loading...
