28
Remote Start
Use a smart phone to control your appliance remotely.
You can also monitor your cycle operation so you know
how much time is left in the cycle.
NOTE
•
You must rst connect to a gateway and register your
appliance in order to use the Remote Start function.
(Refer to 'SMART FUNCTIONS')
To Use Remote Start:
1
Press the
Power
button.
2
Put the laundry in drum.
3
Press and hold
Remote Start
button for 3
seconds to enable Remote Start function.
4
Start a cycle from the LG SmartThinQ application
on your smart phone.
NOTE
•
If you do not start your appliance, it will wait to start
a cycle until you turn off your appliance from the
application or disable the Remote Start function.
•
When Remote Start is turned on, the door is
automatically locked.
To Disable Remote Start:
When the Remote Start is activated, press and hold
Remote Start button for 3 seconds.
NOTE
•
If the door is open, Remote Start is disabled.
Child Lock ( )
Use this option to disable the controls. This feature can
prevent children from changing cycles or operating the
appliance
Locking the Control Panel
1
Press and hold the
Wash
and
Temp.
buttons for
three seconds.
2
A beeper will sound, and ‘ ’ will appear on the
display.
When the Child Lock is set, all buttons are locked
except the
Power
button.
NOTE
•
Turning off the power will not reset the child lock
function. You must deactivate child lock before you
can access any other functions.
Unlocking the Control Panel
Press and hold the
Wash
and
Temp.
buttons for three
seconds.
•
A beeper will sound and the remaining time for the
current programme will reappear on the display.
Beep On / Off
1
Press the
Power
button.
2
Press the
Start/Pause
button to start a cycle.
3
Press and hold the
Add item
and
Favourite
buttons simultaneously for three seconds to set
the Beep on/off function.
NOTE
•
Once the Beep on/off function is set, the setting is
memorized even after the power is turned off.
•
If you want to turn the Beeper back on, simply repeat
this process.
To Next Page
Loading...
