LG WM1377HW Series - Connecting the Drain Line

I N S TA L L AT I O N I N S T R U C T I O N S
CONNECTING THE DRAIN LINE
Stand
Pipe
Tie Strap
Clip the end of the hose into the elbow bracket.
Insert the end of the drain hose into a standpipe.
Use tie strap to secure the drain hose in place.
NOTE: Total height of the hose end should not
exceed 96 in. (244.8 cm) from the bottom of the
washer.
Option 1: Standpipe
Elbow
Bracket
Drain
Hose
Clip the end of the hose into the elbow bracket.
Hang the end of the drain hose over the side of
the laundry tub. Use tie strap to secure the drain
hose in place.
NOTE: Total height of the hose end should not
exceed 96 in. (244.8 cm) from the bottom of the
washer.
Laundry
Tub
Option 2: Laundry Tub
Elbow
Bracket
Tie
Strap
Drain
Hose
UÊÊ/iÊ`À>ÊÃiÊÃÕ`Ê>Ü>ÞÃÊLiÊ«À«iÀÞÊ
secured. Failure to properly secure the drain
hose can result in flooding and property
damage.
UÊÊÊÌÊÃÌ>ÊÌiÊi`ÊvÊÌiÊ`À>ÊÃiÊ}iÀÊ
than 96 in. (244.8 cm) above the bottom of the
washer.
UÊÊ/iÊ`À>ÊÕÃÌÊLiÊÃÌ>i`ÊÊ>VVÀ`>ViÊÜÌÊ
any applicable local codes and regulations.
UÊÊ>iÊÃÕÀiÊÌ>ÌÊÌiÊÜ>ÌiÀÊiÃÊ>ÀiÊÌÊÃÌÀiÌVi`]Ê
pinched, crushed, or kinked.
NOTE: If the drain hose is extended more than 4
inches beyond the end of the end of the elbow
bracket, mold, or microorganisms could spread to
the inside of the washer.
No more than
4 inches
Elbow Bracket
12