LG WM1388HW - Signal; Delay Wash; Water Plus; Rinse+Spin

26
OPERATION
Signal
The washing machine plays a melody when the
wash cycle is finished. The buttons make a sound
each time a button is pressed. The volume of the
melody and button tones can be changed or
turned off as desired.
1
Press the Power button and turn the cycle
selector knob in either direction to select the
desired cycle.
2
Press the Signal button. Adjust the melody and
button tones as desired.
3
You can now modify other cycle settings and add
options (see pages 25-27), or proceed to step 4 to
begin the cycle.
4
Press the Start/Pause button.
Delay Wash
Set the desired start time for the cycle.
1
Press the Power button and turn the cycle
selector knob in either direction to select the
desired cycle.
2
Modify the cycle settings and add other options
(see pages 25-27), if desired.
3
Press the Delay Wash button repeatedly to select
the desired start time.
- The Delay Wash indicator light will turn on.
- The set start time appears on the display panel.
- Each press of the button increases the delay
time by one hour, up to 19 hours.
4
Press the Start/Pause button.
Water Plus
Use this option to add extra water to the
wash cycle for better wash performance(Stain
Treatment) with large or bulky items.
1
Press the Power button and turn the cycle
selector knob in either direction to select the
desired cycle.
2
Press the Water Plus button..
- The indicator light will turn on.
3
You can now modify other cycle settings and add
options (see pages 25-27), or proceed to step 4 to
begin the cycle.
4
Press the Start/Pause button.
Rinse+Spin
Use this cycle to rinse detergent from the load.
1 Press the Power button and turn the cycle
selector knob in either direction to select the
desired cycle.
2 Press the Rinse+Spin button.
3 Press the Spin Speed button repeatedly to set
the spin speed.
- The indicator light for the selected spin speed
will turn on.
4
Press the Start/Pause button.
Extra Rinse
Y ou can add an extra rinse cycle to the default rinse
cycle.
1
Press the Power button and turn the cycle
selector knob in either direction to select the
desired cycle.
2
Press the Extra Rinse button.
- The Extra Rinse indicator light will turn on.
3
You can now modify other cycle settings and add
options (see pages 25-27), or proceed to step 4 to
begin the cycle.
4
Press the Start/Pause button.
Pre-wash
Pre-wash for 17 minutes when clothes are covered
in dirt or dust. This feature is suitable for heavily
soiled items.
1
Press the Power button and turn the cycle
selector knob in either direction to select the
desired cycle.
2
Press the Pre Wash button.
- The indicator light will turn on.
3
You can now modify other cycle settings and add
options (see pages 25-27), or proceed to step 4 to
begin the cycle.
4
Press the Start/Pause button.