TRAINING MANUAL WM3001H*A
WM3001H*A Page 99 Washer
VIBRATION SENSOR
The vibration sensor is designed to decrease the vibration of the washing machine. It
records movement on two axes (X, or lateral; and Y, or vertical) and sends the
information to the main control board, which adjusts the rotational direction and speed
of the drum to rebalance the load and control vibration, including the striking of
harmonics within the structure of the building.
The sensor is mounted on the top of the tub. The only test available is to verify the input
voltage of 5.0 V
DC
at the connector between pins one and three.
To Next Page
Loading...
