TRAINING MANUAL WM3001H*A
WM3001H*A Page 21 Washer
CONTROL PANEL
The control panel is located on the front of the washer. All options are available from the
control panel.
The ESTIMATED TIME remaining is shown
in the window. This may fluctuate during
the cycle because the washer will make
numerous adjustments based on fuzzy logic
and the data supplied by various sensors in
the machine.
CHILD LOCK will render every button
except the CHILD LOCK button
nonfunctional. CL blinks in the display
when the CHILD LOCK is engaged. To turn
off the machine if it is running with CHILD
LOCK engaged, you must first disengage
CHILD LOCK and then press POWER to
turn it off.
The START / PAUSE button is to the right
of the cycle knob. Twist the knob to select
a cycle; then push START / PAUSE to push
it to START or PAUSE the cycle.
The CUSTOM PROGRAM button allows
the user to set all the desired options on a
cycle commonly used so that cycle is then
available at the touch of a single button.
The DOOR LOCKED indicator shows that
the door lock is engaged.
To Next Page
Loading...
