Copyright © 2016 - 2017 LG Electronics Inc. All rights
reserved. Only training and service purposes.
25
4) Disassembly of Tub Cover and Pulsator
① Remove separate hooks fixed with upper of outer tub and take off the tub cover.
② emove the pulsator cap.
③ Remove the pulsator screws.
④ Remove the pulsator washer.
Tub Cover
Pulsator Cap
Pulsator
Screw
Pulsator
Inner Tub Cap
Pulsator
Hub Fixing Nut
Outer Tub
Inner Tub
Stator
Rotor
Rotor Nut
Hub Attachment Nut
Shaft
Bearing Housing ASM
Inner
Tub Cap
Hit the bar using the hammer. Disconnect hub nut and disassemble the inner tub.
5) Assemble the service tool (38 mm wrench)
6) Remove the hub attachment nut. (38 mm)
To Next Page
Loading...
