www.lgmgeurope.com
AS0808 / AS0808E / AS0812 / AS0812E / AS1012 / AS1012E / AS1212 / AS1212E / AS1413
30
Chapter 6 - Inspection before operation
• Platform control lever
• Brake release component
• Exit protector
6) Check the complete machine for:
• weld connection or crack of the structural element
• Corrosion or damage to machine
• Keep all construction elements and other important parts complete, keep the corresponding fasteners and
pins in the correct position and attach them.
• Install the protective rail, place the protective rail pen in the correct position and tighten the bolts.
• Keep the chassis battery drawer and oil pump drawer closed and locked, and connect the battery correctly.
Notice: If the machine is to be checked when lifting the platform, keep the
safety support in the correct position. See "Operation Notice".
To Next Page
Loading...
