www.lgmgeurope.com
AS0808 / AS0808E / AS0812 / AS0812E / AS1012 / AS1012E / AS1212 / AS1212E / AS1413
42
Chapter 11 - Maintenance
Description
1) Follow the operating manual of the device.
2) The preparation for delivery consists of the operation check, item maintenance and functional test.
3) Register the results in the table. Fill in each completed item according to the table in the operating manual.
4) If the inspection result "N" is made, stop operating the unit, repair it, and check the device again. Place a
check mark on the position "G" after the inspection.
11.8 Maintenance and inspection report
Evaluation (V) Completed
(N) not completed
(G) repaired
Preparation for delivery
Operator Inspection Completed
Maintenance Item Completed
Function test completed
Model
Serial number
Date
Owner
Inspector (printed)
Signature of inspector
Title of inspector
Inspection company
Model
Serial number
Date
Total time
Owner
Inspector (printed)
Signature of inspector
Title of inspector
Inspection company
To Next Page
Loading...
