Liebert DCD User Manual

Figure 2.2 Top view of rack with Liebert DCD
2.2 Checking and Unpacking
Upon arrival of the module and before unpacking it, verify that the labeled equipment matches the bill of
lading.
Inspect all items for visible and concealed damage. Damage should be immediately reported to the carrier
and a damage claim filed with a copy sent to Vertiv™ or to your sales representative. If concealed damage
is later found, report it to both the shipping company and your local Vertiv representative.
Check to be sure all required assemblies and parts have been received.
The Liebert DCD is shipped in protective packaging and secured to a pallet (see Figure 2.4 on page11).
Do not remove these protective items from the Liebert DCD before it is at the installation location.
Exercise care to prevent damage when unpacking and handling the Liebert DCD.
2.2.1 Recycle Packaging
All material used to package this module is recyclable. Please save the material for future use or dispose of
it appropriately.
Vertiv | Liebert® DCD™ User Manual | 8

Liebert DCD Specifications

General

Brand	Liebert
Model	DCD
Category	Racks & Stands
Language	English