Liebert DCD User Manual

TABLE OF CONTENTS
Important Safety Guidelines 1
Liebert DCDComponent Locations 3
Model Number Nomenclature 4
1 Introduction 5
1.1 References 5
1.2 Pre-Installation Checks 5
1.3 Installation Considerations 5
1.4 Room Preparation 5
1.5 Storage and Transportation 6
2 General Product Information 7
2.1 Product/System Description 7
2.2 Checking and Unpacking 8
2.2.1 Recycle Packaging 8
2.2.2 Module Handling 10
2.2.3 Unpacking the Module. 10
3 Mechanical Considerations 13
3.1 Liebert DCD Dimensions 13
3.2 Cooling Principle 13
3.3 Determining Placement in the Conditioned Space 14
3.4 Air Flow 14
3.5 Water Quality 15
3.6 Water Temperature 15
4 Installation 17
4.1 Liebert DCD Frame Preparations 17
4.2 Installing the Liebert DCD Frame on a DCM Rack 18
4.2.1 Required Tools 18
4.3 Installing the Liebert DCD Door 22
4.4 Installing the Liebert DCD Swivel Joint Covers 28
4.5 Reversing Door Handle 31
5 Piping 33
5.1 System Connection Configuration 33
5.2 Connection Methods and Points 35
5.3 Floor Cutout Dimensions for Installation with Bottom Connections 35
5.4 Insulation 36
5.5 Chilled Water Distribution Units 36
5.5.1 Recommended Pipe Size 36
5.6 Open Loop Chilled Water Systems 36
5.7 Chilled Water Connections 37
5.7.1 Strainer 37
5.7.2 Service Valves 37
Vertiv | Liebert® DCD™ User Manual | i

Liebert DCD Specifications

General

Brand	Liebert
Model	DCD
Category	Racks & Stands
Language	English