4.5 Reversing Door Handle
If installing the Liebert DCD for top chilled water connection, the handle would be upside down. The
handle will function but can be reversed for convenience.
To reverse the handle:
1. Open the door and remove all the bolts holding the door handle and lock assembly, including
the four brackets. Studs and nuts secure the brackets to the door frame.
2. Flip the door handle and lock assembly 180 degrees and reattach it with the bolts and nuts.
3. Check the handle and lock to ensure they operate properly.
Figure 4.19 Reverse door handle
Vertiv | Liebert® DCD™ User Manual | 31
To Next Page
Loading...