Configuration Program
26
8.7 Options Tab Used With Earlier GXT 2U Models
This version of the configuration program will accompany GXT 2U UPS models that support new pro-
gramming features accessible using the Options tab.
If version 1.6 (or later) is used with an earlier GXT 2U model (with an earlier UPS firmware version),
the Any Mode Shutdown features cannot be changed.
If the configuration program is used with an earlier UPS model (with an earlier UPS firmware ver-
sion) that does not support the modification of these settings, the Options tab will display a reminder
of the factory default settings, as shown. These cannot be changed.
To Next Page
Loading...
