Liebert itON 600 User Manual

Liebert PSA itON Installation and User Manual
Liebert PSA itON UPS
User Manual
Version: V2.8
Revision date: November 14, 2005
Emerson Network Power provides customers with technical support. Users may contact the nearest
Emerson local sales office or service center.
While every precaution has been taken to ensure accuracy and completeness in this manual,
Emerson Network Power assumes no responsibility and disclaims all liability for damages resulting
from use of this information or for any errors or omissions.
Emerson Network Power pursues a policy of continuous product development and reserves the
right to change the equipment design without notice.
Copyright © 2005 by Emerson Network Power
All rights reserved. The contents in this document are subject to change without notice
Page １ V2.8 Emerson Network Power

Liebert itON 600 Specifications

General

Model	Liebert itON 600
Wattage	360 W
Output Waveform	Simulated Sine Wave
Capacity	600 VA
Input Frequency	50/60 Hz
Output Voltage	230 VAC
Output Frequency	50/60 Hz
Battery Type	Sealed Lead Acid
Typical Recharge Time	4-6 hours to 90% capacity
Transfer Time	2-6 ms
Outlets	IEC C13
Communication	USB
Operating Temperature	0°C to 40°C
Operating Humidity	0 to 90% (non-condensing)
Type	Line-Interactive UPS